Building A Desk

So y’all ever get like sorta ahead of yourself and create, in your head, what would be your ideal but then you realize over time, it’s probably best to just go for what’s REAL. Like, set your sites a bit, well – smaller.

My dear husband, you guys. He’s the best. I come to him with ideas, and he builds them. Sometimes he complains and grumbles – but what he usually does before he starts belly aching is procrastinate. Now, I can’t blame him for any of the above, but I have an ever expanding uterus and these days I’m on a tight timeline to get things done.

So in the name of compromise, and having something up and ready to go sooner rather than later, instead of my grand vision (this).

Built In Desk Design

I settled on something a bit more manageable. The silver lining was that we were able to use a counter top we had already built this summer for another project that was *literally* sitting in our garage and put it to use, AND we were able to use considerably less wood, which brought our total out of pocket cost to $30 in wood, and $30 in paint (which I plan to use in our daughter’s room, too). You can see the piece of wood peaking behind the plywood.

Built_Ins_From_Plywood

The plywood is what we used for the base of the desk and the main change from my grand vision is that instead of having bookcases flank either side, I opted for a stand alone style desk for now because it was a) way less work and b) way cheaper/faster.

You can see the bases starting to take shape here. We used construction grade plywood for this base and it turned out great.

DIY_Built_In_Desk

It’s the same wood we used when we did our built-ins (below) a few months back, so more or less, we already knew what we were working with and how it would look once finished. It’s $30 per sheet at Home Depot, for those that may want to use it in the future.

Affordable_Library_Sconce


For each of the bases we prepped all of our wood before and very strategically (ie on paper first) decided how we would cut the wood to minimize scrap and make sure we got as far as possible with each wood piece.

H LOVES helping his dad with projects now, but hates the extra noise. I don’t know if other people’s kids are as obsessed with noises as mine but pretty much every single thing on this green earth, his first comment to us is – it made a noise? Yes, child, it did. Plus with anything as loud as a table saw, etc, I want his ears to be covered anyway since I’d feel sorta bad if we gave to poor kid issues down the road from brazenly using all kinds of noise makers around him. (These are the earmuffs we bought for him and he loves them – Jay even wears them sometimes when the kiddo isn’t around, haha!)

Ear_Protection_Child

Once the cabinet bases were trimmed out, each one looked like this! I even had Jay leave out the base on the left side of the cabinet so that we could add in a built-in location for our litter box, haha!

DIY_Desk_Base

One thing we did that actually made a big difference this time around was use a wood hardner compound that made the wood so much smoother, and minimized our need to do quite as much sanding (which was a big time saver). I’d highly recommend this step if you’re new to building out furniture, like we are, because it was a game changer for this build! This was the product we used (left here from the previous homeowner, bonus).

Cliff hanger, I’ll post photos next week for you to feast your eyeballs on!! 😀

Leave a Reply

Your email address will not be published. Required fields are marked *